Product Information

Products Types

1. Single margin Opp film with one side Zn-Al metallized

2. Single margin Opp film with slope resistance one side Zn-Al metallized

3. Single margin Opp film with high resistance one side Zn-Al metallized

4. Segmented metallized film

5. Middle margin PET film with double sided Al metallized

6. Single margin OPP film with one side Al metallized

7. Double margin OPP film with one side Al metallized

8. Multi-margin OPP film with one side Zn-Al metallized

Note: We can design and produce all kinds of metallized film for capacitors according to customer's requirement.

Cores

1. Material：Plastic

2. Width：Film Slit Width ±0.3mm

3. Inner Diameter：75mm +1.0mm/-0.5mm

Outer Diameter of film roll

Packing

1. Film rolls are packed and heat-sealed in vacuum plastic bags with desiccants inside

2. The bags are marked with type labels

3. The bags are packed in carton cases

4. The cartons are wrapped in wooden cases or reinforced carton

Storage

1. Metallized film should be stored in its original package with temperature 5~35ºC and humidity less than 85%RH before using.

2.Metallized layer is easily oxidized when exposure to moisture.Therefore,the film should

be used as soon as possible when opened.

3. The recommended temperature is 15-25ºC with humidty less than 60%RH after opening.

4. With original sealed package,and stored as mentioned above,the storage time can be as following:

Al metallized film:12 months from the delivery date.Al/Zn Alloy metallized film :As zinc is

quite unstable,the storage period(from delivery date) depends on the resistance of the film:

less than 10Ω：6 months

10-30Ω:3 months 

>30Ω:1 month

Contact Information