This wire is a test device used to verify the prevention of human contact with hazardous parts.

This test device is also used for protection verification to prevent contact by handheld wires.

 1. Manufactured in accordance with relevant clauses of GB/T4208-2008, IEC61032:1997, IEC60529:2001, and UL. 

 2. The Class D test probe (Class D test pin) is an essential tool for conducting electric shock protection tests for household and similar electrical appliances. 

 Technical Parameters:

 1. Probe length: 100mm

 2. Probe diameter: 1mm

 3. Stop ball diameter: 35mm 

 4. Handle diameter: 10mm

 5. Handle length: 100mm 

 6. According to IEC61032 Figure 4 (Test probe D) and GB/T4208-2008 Table 6 (first characteristic numeral 4/5/6). 

 Usage Method:

The joint part of the standard test finger must not touch live parts or approach hazardous parts, and the 35mm circular baffle must not enter. In tests for preventing access to hazardous parts, the Class D test probe must be applied with a thrust of 1±0.1N.