DuPont HPR9200 Cl Resin, as a commonly available ion exchange resin on the market, offers more advantages compared to resins from other brands. It has a relatively longer service life, uniform particle size, and can remove most impurities from solutions. Additionally, it exhibits strong anti-fouling properties, making it suitable for use in various solutions.

In industries such as industrial water and wastewater treatment, this resin is an excellent choice. It has strong regeneration capabilities and can be regenerated with an appropriate amount of regenerant. Due to its high resistance to fouling, its actual service life is relatively longer.

Usage of DuPont AmberLite? HPR9200 Cl Strong Base Anion Resin:

1. When handling the resin during filling, avoid direct contact with hands to prevent skin allergies. If direct contact occurs, rinse thoroughly with clean water afterward.

2. Do not dispose of ion exchange resin arbitrarily after it has reached the end of its service life. It should be placed in intact packaging containers and handled by professional units to avoid environmental pollution.

3. Organic solvents may be used during the application of ion exchange resin. Pay attention to the safety of operators to prevent harm from solvents.

4. The resin may contain other substances from the manufacturing process. Therefore, these substances must be removed before use, and appropriate techniques should be employed to ensure the required purity.

5. When regenerating ion exchange resin, regenerants are typically required. During the dilution of regenerants, wear plastic or rubber aprons and gloves, protective goggles, and masks. Take safety precautions and operate in a well-ventilated area.

6. When using nitric acid or other strong oxidants, ion exchange resin may react violently. When using such oxidants, precautions must be taken to prevent sudden pressure increases in equipment. Follow the technical manual or consult relevant technical and experienced personnel.

Features of DuPont AmberLite HPR9200 Cl Ion Exchange Resin:

DuPont AmberLite HPR9200 Cl ion exchange resin features excellent temperature resistance, high operational capacity, high regeneration efficiency, long service life, outstanding chemical stability, high resistance to organic fouling, excellent abrasion resistance, and high polarity substances and resin particles. It is capable of applications such as pharmaceutical purification, removal of carbonate hardness in water treatment, antibiotic purification, food and organic chemical purification, and homogeneity. It is primarily used in various industrial fields.

When mixing ion exchange resin, nitric acid and other strong oxidants can cause explosive reactions. When considering the use of oxidants like nitric acid, the treatment equipment must be properly designed to prevent sudden pressure increases. Before contacting ion exchange resin with strong oxidants, ensure proper precautions are taken.

Precautions for DuPont AmberLite HPR9200 Cl Ion Exchange Resin:

The resin can be stored for 2 years, and after 2 years or longer, it can be used after re-inspection.

The storage temperature for ion exchange resin should be between 5-40°C. It should be stored in sealed containers to avoid exposure to cold.

Regenerants used for resin regeneration should be of the highest possible quality. However, some regenerants contain high levels of iron ions and may contaminate the resin.

The operating temperature of ion exchange resin should not exceed the temperature specified in the user manual. If the operating temperature is too high, the performance of the resin may be affected to some extent. The typical operating temperature is 20-30°C.

Industrial-grade ion exchange resin typically contains small amounts of oligomers, unreacted monomers, and inorganic impurities such as iron, lead, and copper. When the resin comes into contact with water, acids, alkalis, or other solutions, these substances may migrate into the solution, affecting the quality of the effluent.

Our company offers small-quantity sales (starting from 1kg)