Freon sensor, a magical device that combines high technology and practicality. Its construction is extremely sophisticated, mainly consisting of two major components: the sensing element and the signal processing circuit. The sensing element is like a super detective, possessing ultra-high sensitivity and accuracy. Once Freon gas comes into contact with the sensing element, its resistance value immediately changes. This change is like a mysterious signal, indicating the presence and concentration of Freon gas. The signal processing circuit, on the other hand, acts as a clever assistant, processing and analyzing this signal, accurately converting the change in resistance value into an easily understandable Freon gas concentration value. In this way, we can use the Freon sensor to monitor the concentration of Freon gas in real-time, ensuring environmental safety. Moreover, Freon sensors are widely used in various fields such as refrigeration and firefighting, significantly improving work efficiency and safety.

Super strong compatibility supports sensors of various principles

Imported electrochemical\PID\infrared gas sensors

Supports dual signal output: 4-20mA + RS485 simultaneous output

Custom ultra-long signal cables, rich customization experience to meet various industry needs... Solving gas detection challenges - Liye is your best choice. Products are mainly used in: environmental protection, aerospace and military, petroleum and petrochemical, gas, medical, mining, metallurgy, municipal engineering, communications, aquaculture, and other fields!

●Product Name: Freon Gas Sensor Detection Module

●Detection Gas: Freon

●Measurement Range: Determined by sensor selection

●Display Unit: ppm, mg/m3, ppb, pphm, %VOL, %LEL (some switchable)

●Resolution: Determined by sensor selection

●Sensor Type: All 4-series/7-series electrochemical sensors; infrared sensors; PID sensors; temperature and humidity sensors; PM2.5/PM10 sensors

●Response Time: ≤20 seconds (T90) Detection Accuracy: ≤±3% (depending on the specific sensor)

●Linearity Error: ≤±1% Zero Drift: ≤±1% (F.S/year)

●Recovery Time: ≤20 seconds Gas Expansion: Supports 1-6 sensors (optional)

●Repeatability: ≤±1% Service Life: Sensor lifespan 2-10 years

●Signal Output:

① 4-20mA signal: Standard 16-bit precision 4-20mA output chip, transmission distance 1Km

② RS485 signal: Uses standard MODBUS RTU protocol, transmission distance 2Km

③ Voltage signal: 0-5V, 0-10V output, can be set independently (optional)

④ Switch signal: Standard 2 sets of relays, optional third set of relays, passive contacts, capacity 125VAC/0.3A 30VDC/1A

Transmission Method:

① Cable transmission: 3-core, 4-core cable, long-distance transmission (1-2 kilometers)

② Wireless transmission: Supports 433Mhz, wireless radio transmission mode, transmission distance 2-10Km, depending on power (optional) Operating Environment: Operating temperature -30 to 50°C (higher temperature and humidity environments require customization or optional pre-processing system)

Operating humidity ≤95%RH, no condensation

Operating pressure 0 to 100Kpa

Operating power supply 24VDC (12～30VDC)

Power Consumption:

① Electrochemical sensor: P ≤± 0.9W

② Ordinary catalytic sensor: P ≤± 2.3W

③ Thermal conductivity sensor: P ≤± 1.2W

④ Thermal conductivity sensor: P ≤± 1.2W

⑤ Infrared sensor: P ≤± 1.4W

⑥ PID sensor: P ≤± 1.2W