XIAMETER? PMX-200 Silicone Fluid

Price:Negotiable

Industry Category:	Chemicals
Product Category:
Brand:
Spec:

Send Inquiry Contact Info

南京丹沛化工有限公司

Product List About Us

Contact Info

Add:棲霞區(qū)仙林學(xué)衡路1號(hào)夢(mèng)天地A棟915室, Zip: 210001
Contact: 史燕飛
Tel:025-58074836
Email:sales@danpeichem.com

Other Products

Celvolit CP149

Description

Additional Information

Name	Viscosity	Manufacturer	Packaging
XIAMETER PMX-200 Silicone Oil	5-20cs	Dow Corning	190kg/drum

XIAMETER PMX-200 Silicone Oil

Polydimethylsiloxane Fluid

Typical Physical Properties

Test	Unit	Result
		5.0cSt	10.0cSt	20.0cSt
Appearance		Completely Transparent	Completely Transparent	Completely Transparent
INCI Name		Dimethicone	Dimethicone	Dimethicone
Specific Gravity at 25℃(77°F)		0.913	0.935	0.949
Refractive Index at 25℃(77°F)		1.3960	1.3989	1.4009
Color, APHA		5	5	5
Flash Point, Closed Cup	℃(°F)	134(272)	211(411)	246(474)
Acid Value, BCP		trace	trace	trace
Melting Point	℃(°F)1,2	-70(-94)	-60(-76)	-52(-62)
Pour Point	℃	-100(-148)	-100(-148)	-84(-119)
Surface Tension at 25℃（77°F)	dynes/cm	19.7	20.1	20.6
Volatile Content at 150℃(302°F〉	%	-	-	4.5
Viscosity Temperature Coefficient		0.55	0.56	0.59
Coefficient of Expansion	cc/cc/℃	0.00105	0.00108	0.00107
Thermal Conductivity at 50℃(122°F)	g cal/cm.see℃.	-	0.00032	0.00034
Solubility Parameter3		7.1	7.2	7.3
Solubility in Typical Solvents
Chlorinated Solvents		High	High	High
Aromatic Solvents		High	High	High
Aliphatic Solvents		High	High	High
Anhydrous Alcohol		Good	Good	Good
Water		Poor	Poor	Poor

1. Melting point temperatures are typical and may vary slightly due to molecular distribution. If the melting point is critical for your application, a comprehensive evaluation of several batches should be conducted.

2. Due to different cooling rates, the pour point obtained by this test method may be lower than the temperature at which these silicone oils melt.

3. Fedors method: R.F. Fedors, Polymer Engineering and Science, February 1974.

Advantages:

For Personal Care:

• Soft feel, smooth and delicate skin

• Good dispersing properties

• Leaves no residue or deposits

• Instant effect

• Non-greasy feel

For Industrial Applications:

• Physical properties change very little over a wide temperature range - relatively flat viscosity-temperature slope, service range from -40℃ to 200℃

• Low surface tension - easy to wet clean surfaces, providing water repellency and release characteristics

Applications:

1. Personal care products such as antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions, bath oils, sun protection products, nail polishes, etc.

2. Industrial applications such as glass bottle and lens coatings, household product ingredients, mechanical fluids, penetrating oil components, surfactants, coatings, electrical insulating fluids, surface treatment agent components, etc.