I. 300-ton/3000KN Automatic Testing Pressure Testing MachineMain Purpose

     This testing machine is used to determine the compressive strength of building materials such as bricks, stones, and concrete.

    The machine employs electric hydraulic loading, sensor force measurement, digital display of force values, and a printer for recording force data, with conversion to compressive strength. This testing machine complies with the national standard "Standard for Test Methods of Mechanical Properties of Ordinary Concrete." It requires manual control of the loading speed and is equipped with a loading speed indicator, peak hold function, and overload protection. It is an essential testing and inspection device for construction, building materials, highway and bridge engineering units.

II. 300-ton/3000KN Automatic Testing Pressure Testing MachineMain Technical Parameters

1. Load:                          3000KN

2. Accuracy of Indication:                Grade 1

3. Resolution:                       0.1KN

4. Distance Between Pressure Plates:        350mm

5. Upper and Lower Pressure Plate Specifications:     300×250mm

6. Piston Diameter *      Stroke: Diameter 290×80mm

7. Motor Power:                  0.75KW

8. Input Voltage:                    380V

9. Overall Dimensions:           880×480×1400mm

10. Net Weight:                        950kg

III. 300-ton/3000KN Automatic Testing Pressure Testing MachineStructure Overview

The testing machine mainly consists of three parts: the body, the hydraulic tank, and the force measurement instrument.

1. Body Section

The body of the testing machine is composed of four columns connecting the cylinder body to the upper beam.

On the upper beam of the testing machine, an adjustment screw, a large handwheel, and a nut screw are installed to adjust the no-load height of the machine. The lower end of the screw is equipped with a ball seat and an upper pressure plate. The lower pressure plate is placed on the piston of the oil cylinder. When the specimen contacts the upper pressure plate, the ball seat of the upper pressure plate can self-adjust for balance, ensuring the specimen remains level with the upper and lower pressure plates. The lower pressure plate is engraved with positioning lines for the specimen. During testing, the specimen must be aligned with these lines. Below the lower pressure plate, a dust cover is installed to prevent or reduce dust from entering the oil cylinder during piston movement, which could damage the cylinder or oil seal. A sealing device is installed between the piston and the oil cylinder to prevent oil leakage. However, if a slight amount of oil leaks from the piston during use, an annular oil groove at the top of the cylinder body and an oil discharge channel will direct the oil back to the main tank.

2. Hydraulic Section

The hydraulic tank of this testing machine mainly consists of an oil tank, oil pump, oil filter, motor, speed valve, and return oil valve. The oil pump is a direct-drive axial five-piston pump. During loading, the loading speed valve should be manually controlled to regulate the piston's rising speed (this valve is integrated with the safety valve). During unloading, the return oil valve can be turned to allow the oil cylinder to descend slowly. The safety valve is preset to an appropriate position at the factory, and users should not adjust it during normal use.