Guangzhou Jincheng Scientific Instruments Co., Ltd. supplies the YAMATO SI811C Natural Convection Dry Heat Sterilizer with program function and easy setting.

Features of the Dry Heat Sterilizer:

Rapid, safe, and reliable sterilization function.

Constant operation, program operation, automatic stop operation, and automatic start operation are all achievable.

Equipped with a repeat function and a 3-segment, 30-step program controller.

Supports operations such as over-temperature preventer, deviation correction, and key lock settings.

Safety

Self-diagnostic circuit (sensor abnormality, heater disconnection, SSR short circuit, etc.).

Safety features including over-temperature preventer, leakage protection switch to prevent overcurrent, and key lock.

Dry Heat Sterilizer Parameters:

Model: SI811C

Method: Natural convection dry heat sterilization / Forced air circulation dry heat sterilization

Performance:

Temperature range: Room temperature +5~210°C

GB Standard:

Temperature fluctuation: ±0.5°C (at 210°C)

Temperature uniformity: ±2.5% (at 210°C)

JTM Standard:

Temperature control accuracy: ±1.0°C (at 210°C)

Temperature distribution accuracy: ±2.5°C (at 210°C)

Time to reach maximum temperature: Approximately 70 minutes

Construction:

Interior: Stainless steel plate

Exterior: Cold-rolled steel plate with chemical-resistant coating

Insulation material: Glass fiber

Heater: Nickel-chromium alloy heating wire 1.5KW x 2

Fan blade / Motor: Centrifugal fan blade, 30W motor x 1

Exhaust port: Inner diameter 30mm x 2, rear

Controller:

Temperature control method: 3-segment PID

Temperature setting method: Digital setting via dedicated operation function menu keys and up/down keys

Temperature display method: Measured temperature display: Green 4-digit LED, digital display

Set temperature display: Red 4-digit LED, digital display

Timer: 1 minute to 99 hours 59 minutes and 100 to 999 hours 50 minutes (with timer standby function)

Operation functions: Constant operation, program operation, quick automatic stop operation, automatic start operation

Program mode: Program operation 3 segments 30 steps (30 steps x 115 steps x 2, 10 steps x 3)

Additional functions: Deviation correction function, key lock function, power failure compensation function

Sensor: K-type thermocouple (temperature controller and over-temperature preventer)

Safety devices: Self-diagnostic circuit (temperature sensor abnormality, heater disconnection, automatic over-temperature prevention function, SSR short circuit), over-temperature preventer, overcurrent leakage protection switch, key lock function

Specifications:

Internal dimensions (W x D x H mm): 600 x 500 x 1000

External dimensions (W x D x H mm): 710 x 651 x 1608

Capacity: 300L

Shelf load capacity: 15kg per layer

Number of shelf layers: 29 layers

Shelf spacing: 30mm

Power supply (50/60Hz) rated current: AC220V 15A

Weight: Approximately 110kg

Accessories:

Shelves: 4 stainless steel stamped mesh plates

Shelf supports: 8 pieces

Optional items: Shelves (1 shelf includes 2 shelf supports), micro printer, recorder, combination warning light (standby/operation/fault), external communication function (RS485), temperature output terminal (4~20mA), external alarm output terminal, time arrival output terminal, centralized monitoring software

YAMATO Dry Heat Sterilizer information is provided by Guangzhou Jincheng Scientific Instruments Co., Ltd. For more information about sterilizers, please feel free to contact us.