The working process of the intelligent lighting control system is as follows: when the lighting load (illumination) starts working, the sampling circuit captures the current output voltage. The detection control circuit compares and judges it against the reference voltage, then outputs a control signal to regulate the voltage (contactless) through the voltage regulation circuit. This causes the compensation circuit to generate varying compensation voltages, achieving the goal of reducing and stabilizing the output voltage.

Intelligent lighting high-power street light voltage regulation and control devices JGL-50T, JGL-60T rated operating current: (Amps): 20A, 30A, 40A, 45A, 50A, 60A, 63A, 80A, 100A, 120A, 125A, 150A, 160A, 170A, 180A, 190A, 200A, 250A, 300A, 315A, 400A;

Intelligent lighting high-power street light voltage regulation and control devices JGL-50T, JGL-60T after-sales service description
Regular maintenance

Every half month: Check the tightness of all electrical connection points. Every six months: Check the main inlet for any looseness.

Check the ambient temperature. Check the firmness of the installation at the fixed points.

Check for dust accumulation on the equipment. Check all wires for any damage caused by various reasons.

Note: During normal operation, external micro-breaks may trip due to excessive grid voltage fluctuations or temporary power interruptions in the main circuit. In such cases, simply disconnect the power and reset the micro-break.

Technical features:

Output accuracy: Controlled by an intelligent chip, which continuously collects the output voltage in real-time without affecting the output. Output accuracy is guaranteed within ±2%.

Convenient and practical. Easy installation, no need to modify the user's existing wiring or electrical equipment. The entire installation can be completed in a short time.

Output voltage, reliable.

Can be directly installed on the power supply line without changing the wiring. Installation is convenient.

Whether used for a single unit or an entire system, always reserve margin. Do not let the power voltage regulation and stabilization device operate at full load for extended periods, as this will affect its service life.

Relay driver series products typically do not require an additional power supply unless multiple channels need to be switched simultaneously. The output module connects to the load using screw-type high-power terminals in groups of two, and each output can be controlled individually. This device is suitable for switching resistive, inductive, and capacitive loads. Composition: Rail-mounted intelligent host, rail-mounted power supply. Modules: Light switch control module, dimming module, curtain control module. Intelligent lighting systems generally consist of dimming modules, switch modules, control panels, LCD displays, intelligent sensors, PC interfaces, timing modules, handheld programmers, monitoring computers (large networks require bridge connections), and other components. Bus-type intelligent lighting simple switch features: Load circuit wiring connects to the output terminals of the output unit, and control switches are connected to the output unit using Category 5 cables. When the load capacity is large, only the output unit capacity needs to be increased; the control switches remain unaffected. Suitable for long-distance switching.

Technical parameters:

Braking: Bidirectional automatic voltage tracking

Braking response time: <2ms

Inverter input voltage: AC300V～460V, 45～56Hz

AC150V～230V, 45～56Hz

Applicable motor power: 0～40kW

Input voltage: DC560～760V (adjustable), error 2V

DC280～380V (adjustable), error 2V

Output: Sine wave current

Voltage distortion: <5%

Braking torque: 150%

Designed duty cycle: Continuous

Protection: Overheat, overcurrent

Intelligent lighting high-power street light voltage regulation and control device Scope of application

Indoor type: Installed at the lower end of the indoor lighting control cabinet.

Outdoor type: Can be installed according to user requirements, placed in a stainless steel cabinet with protection rating IP54.

Lighting energy-saving devices are widely used in municipal roads, highways, bridges, gardens, docks, scenic lights, sports squares, amusement venues, light boxes, and other public lighting applications.

Suitable types of lamps: High-pressure sodium lamps, low-pressure sodium lamps, metal halide lamps, high-pressure mercury lamps, fluorescent lamps, and all gas-discharge lighting fixtures.