Keywords: Oil tank corrosion perforation Oil tank perforation repair, Weld oil leakage, Tank body leakage corrosion, Bolt oil leakage, Generator oil leakage, Gas station oil tank leakage, Tank body cracking, Oil tank leakage repair, Floating roof tank oil leakage repair, Tank pipeline corrosion pinholes, Fuel tank oil leakage repair, Oil storage tank leakage repair, Steam turbine leakage repair, Flange leakage repair, Tank crack repair, Inspection hole oil leakage repair Yuke EGO Oil Surface Repair Kit, Yuke EGG Repair Series, EGG Gas Leak Sealing Repair Reliable oil-containing leak sealing technology  Which adhesive is good for oil-containing bonding  Which adhesive can bond with oil present  Oil-containing leak sealing adhesive

Oil tank leakage is a very dangerous situation. If not handled promptly, it can lead to disasters. The locations and causes of oil tank leakage are as follows: 1. In cold regions, some parts of above-ground oil tanks experience internal stress due to significant temperature differences and the cold brittleness of steel plates, or thermal stress caused by sunlight or the temperature difference between incoming oil and the tank body, leading to cracks at joints;

2. Poor welding quality, weld cracks, or pinholes;

3. Uneven settlement of the tank foundation, causing wrinkles and cracks;

4. Corrosion perforation;

5. Improper selection or malfunction of the breathing system, causing the oil tank to burst or collapse.

6. Instability or tank collapse due to design reasons;

7. Freezing and cracking of drain pipes due to lack of insulation measures;

8. Tank floating caused by earthquakes or floods, pulling and cracking the connection between pipelines and the oil tank.

Signs of oil tank leakage typically include: Excessive oil odor; Abnormal drop in oil level; Oil traces on the ground, pipe trenches, or drainage ditches; Discoloration or deterioration of the tank's external anti-corrosion coating due to oil immersion, or accumulation of excessive dust, appearing as black spots or oil beads; Sounds of gas or oil leakage; Breathing valve control pressure lower than normal.   

Equipment corrosion leakage is a common phenomenon. Traditional methods mainly involve welding repairs, which require shutdown and cleaning before operation. Repair welding not only poses safety risks but also leads to "alkali embrittlement" in metals after welding, causing leaks to worsen with more welding.

Yuke Water-Oil Compatible Repair Compound can quickly bond and seal leakage points with simple treatment. After curing, it becomes as hard as cast iron with excellent temperature and corrosion resistance.

For Sinopec oil depot floating roof tanks with water vapor corrosion leakage at the tank bottom, water-oil compatible repair technology allows bonding repairs with oil present, ensuring safety without the need for hot work.

Oil storage tanks can be cold-welded and repaired without hot work, with minimal and convenient downtime.

YukeEGOOil Surface RepairSeriesis used for rebuilding and repairing mechanical equipment, providing a bonding-level repair system on oily surfaces. It is a two-component system based on silicon steel alloy, mixed with highly permeable macromolecular reactive polymers and oligomers, specifically designed for wet, oily, or underwater structures, and can be applied on manually treated surfaces.

Application areas: Transformer oil leakage: Bolt oil leakage, gas leakage oil, radiator oil leakage, weld pinhole oil leakage, flange leakage repair, oil pump oil leakage, oil filter leakage, butterfly valve oil leakage, etc.

Generator oil leakage, air compressor oil leakage, oil tank leakage, floating roof tank body repair, rubber-lined tank repair.

Yuke Water-Oil Compatible Repair Compound can strongly bond on water or oil surfaces without equipment shutdown, with lenient surface treatment requirements. It can be applied on simply manually treated surfaces. In its original state, it is a paste. Components A and B are mixed at room temperature and applied to the repair surface. After curing at room temperature, it becomes as hard as cast iron and can undergo various machining processes without shrinkage or cracking. Its dense macromolecular structure can long-term withstand the strong permeability of highly permeable oils, avoiding stress damage caused by welding and the high downtime costs of replacing parts.

Qingdao Yuke New Material Co., Ltd. was formerly the engineering service provider of the UK E-WOOD Polymer Company. By continuously improving technology in line with domestic and international markets, it has achieved multiple technological advancements. In China, we not only provide products but also offer one-stop engineering services. Polymer repair technology has played an increasingly significant role in recent years in ultra-high voltage transmission systems such as large substations. It has been routinely used for sealing leaks and emergency handling of issues like bushing general caps, transformer oil pipeline weld pinholes, oil pump body pinholes, and the rupture of explosion-proof membranes in on-load tap-changers, as well as oil tank body corrosion leakage, achieving excellent results and fully enabling operation with oil and pressure without shutdown. EG repair technology can adapt to temperatures from -40°C to 140°C, repairing on water and oil surfaces. In practical applications, its lifespan can exceed 10 years, making it a safe and reliable repair technology.