I: 75L Internal Mixer | 75L Mixer | Mixer Manufacturer  Product Features

1. The machine is sturdy and durable, with low failure rate and high production efficiency, 2-3 times that of an open mill (only 6-10 minutes required);


2. The tilting mechanism adopts a toroidal enveloping worm gear pair (TOP) with high transmission efficiency and large load capacity, enabling discharge without stopping, eliminating frequent motor starts, and greatly extending its service life;


3. The spiral angle and working length of the rotor wings are reasonably designed, with the rotor peaks and end surfaces being hardfaced with wear-resistant hard alloy, meeting national standards. The surfaces of the mixing chamber, rotor, and ram that directly contact the material are polished and hard chrome plated, offering bright and strong wear resistance, ensuring no shaft breakage;


4. Components such as the mixing chamber, rotor, and ram adopt a jacketed structure, allowing the introduction of media, steam, thermal oil, or water for heating or cooling to meet various rubber (plastic) mixing process requirements, ensuring excellent and stable material quality;


5. Convenient feeding with rear projection feeding, and the mixing chamber tilts forward 140° for discharge, facilitating both the connection of upstream and downstream processes in the production line and the observation, cleaning, and discharge of the mixing chamber and rotor;


6. Chemical raw materials, rubber, and other additives are mixed or plasticized under sealed, pressurized, and temperature-controlled conditions, resulting in high production efficiency, uniform material dispersion, excellent quality, no environmental pollution, and easy cleaning for material change and color switching;


7. The electrical control system adopts a PLC device, with comprehensive and reliable automatic control monitoring, alarm, and other functions;

8. The joint between the upper mouth of the mixing chamber and the cantilever of the frame uses Taiwan technology, offering excellent sealing and dust prevention. The rotor end face adopts a contact external pressure type lubrication-free sealing structure, which is wear-resistant and durable.


II: 75L Internal Mixer | 75L Mixer | Mixer Manufacturer  Working Principle

During operation, the 75L internal mixer uses two rhomboid rotors rotating relative to each other, with different speeds and speed ratios applying shear stress to the material, breaking molecular chains. During the mixing process, compounding agents are added. The purpose of mixing is to fully blend the materials, achieving the industrial requirements for the material.


III: 75L Internal Mixer | 75L Mixer | Mixer Manufacturer  Technical Parameters

Mixing capacity------------------------------75L
Drive motor-------------------------------110KW
Tilting motor-------------------------------4.0KW
Tilting angle-------------------------------140°
Cooling method-------------------------------Water cooling 0.3-0.4Mpa
Output-------------------------------75-90KG (per batch)
Machine weight-------------------------------Approx. 10500KG

The 75L Internal Mixer | 75L Mixer | Mixer Manufacturer  adopts a secondary corner anti-powder leakage design, along with a precise temperature control system and high dispersibility, which has consistently earned praise from both new and old customers!