Product Introduction:

Solar-powered road studs, also known as raised pavement markers, are protrusive marking blocks fixed on the road surface to serve as road markings. They can be used on highways or other roads to mark centerlines, lane dividers, and edge lines; they can also be used to mark dangerous sections such as curves, entrance/exit ramps, channelizing lines, road narrowings, and road obstacles. Since solar road studs operate in synchronized flashing mode, they are commonly used for road edge lines, green belt outlines, lane width markings, etc. They are highly effective facilities for urban beautification, fog guidance, and enhanced road marking recognition. Powered by solar energy and utilizing wireless communication controllers, the light-emitting beads used are referred to as active light-emitting road studs.

Product Name: Solar-Powered Road Studs

Model: XH-TBDD-101A

Specifications: 115*100*22mm

I. Technical Parameters:

1. Energy storage component: NI-MH high-temperature resistant battery 1.2V-800MAH , charge-discharge cycles >1000 times, capacity not easily reduced;

2. Solar charging battery: monocrystalline silicon 5V 30MA;

3. Working time: Under standard light intensity, 8 hours of exposure can provide continuous operation for over 40 hours;

4. Operating mode: Flashing (1Hz or 0.5Hz) , single-sided or double-sided;

5. Display device: Ultra-bright LED , luminous intensity >3000mcd ( yellow, red) >5000mcd ( white);

6. Light colors: Red, yellow, white, blue, green, etc.; Night visibility distance: 300 to 500 meters;

7. Material: Cast aluminum shell + epoxy resin filling;

8. Activation light intensity: Front illumination less than 500Lux;

9. Operating environment: -20 ℃ to 70 ℃;

10. Installation: Bonded with epoxy resin adhesive, can also be nailed for reinforcement, firm and stable, not easily detached;