The L0.8-L2.4 series of Xiangye Pneumatic Tank Pump (Tank Pump) belongs to the L-type fluidized tank pump, specifically designed for medium to long-distance pneumatic conveying of powdered materials. Below are the comprehensive technical parameters and application features:
I. Core Parameters
Model Pump Inner Diameter (mm) Total Volume (m3) Max. Conveying Distance (m) Working Pressure (MPa) Conveying Capacity (t/h) Suitable Materials

L0.8 800 0.35 500 0.2-0.5 5-12 Cement, Fly Ash, Grains
L1.2 1200 1.3 800 0.2-0.5 12-20 Mineral Powder, Chemical Raw Materials
L2.4 2400 9.25 1500 0.2-0.5 50-55 High-Density Particles (e.g., Coke Powder)
Note: The mixing ratio (air-to-ash ratio) is 50-70, and air consumption increases with model size (L2.4 reaches 20m3/min).

II. Structural Features
Fluidized Design
The bottom fluidization device fully aerates materials, reduces residue, and improves conveying efficiency by over 30%.
Automated Control
Supports PLC or relay control, enabling full-process automation of feeding, pressurization, conveying, and purging.
Modular Configuration
Can flexibly match DN50-DN150 conveying pipe diameters to adapt to complex terrains (e.g., vertical lifting, bend layouts).

III. Application Scenarios
Power Industry: Fly ash conveying in coal-fired power plants, with single pump output up to 55 tons/hour.
Building Materials & Chemicals: High-temperature materials like cement raw meal and mineral powder (temperature resistance <120°C).
Food & Pharmaceuticals: Sealed pipeline design ensures material cleanliness.
IV. Selection Recommendations
Short Distance (<500m): Prefer L0.8-L1.2 to reduce energy consumption.
High-Abrasion Materials: Recommend pairing with double sleeves or wear-resistant linings.
For special customization (e.g., corrosion-resistant materials, dual-tank continuous conveying), detailed calculations based on material characteristics and conveying distance are required.