Detailed Description:


1. Among similar products, it features lower insertion impedance, reducing signal attenuation.
2. Under the same test voltage and waveform, residual voltage is at least 5-20V lower than comparable products.
3. Sturdy, fire-resistant ABS housing suitable for various hazardous environments.
4. Provides full protection modes for line-to-line and line-to-ground.
5. Fast response time, less than 10ns.

Description:
1. Used for wiring inside buildings  
2. Protects the use of Category 3, 4, or 5, 6 twisted pair cables with RJ45 connectors
3. Suitable for signal transmission systems using 8-core non-twisted pair cables
4. Protects 1, 4, 8, or 16 lines
5. Applicable to RS 422/423, 10BASE-T, 100BASE-T, Token Ring, and Fast Ethernet systems
6. Can be used for single connections or multi-port applications
7. Can be placed freely or installed in a 19-inch rack for multi-port applications

Application:
Used on network cables laid inside buildings to locally protect equipment from transient overvoltages induced on data cables by magnetic fields caused by lightning strikes.

Performance and Advantages:
1. Allows voltage below the equipment sensing level to pass through.
2. Protects twisted pair cables operating at 100Mbps.
3. Protects all 8 pins in each line.
4. Protects network connections of individual devices with ESP LN.
5. Protects multi-port applications such as hubs, switches, and patch panels with ESP LN-4*, ESP LN-8*, ESP LN-8/16, ESP LN-16/16.
6. Free placement for 4 or 8 ports (ESP LN-4* and ESP LN-8*), 19-inch rack panel for 8 or 16 ports (ESP LN-8/16 and ESP LN-16/16).
7. Negligible insertion impedance.
8. Sturdy housing.
9. Simple plug-and-play installation.
10. Simple grounding via an individual metal braid.
* Note: ESP LN-4 and ESP LN-8 are not indicated.

Installation:
Connect the protector in series between the incoming data cable and the equipment. Create appropriate grounding attachments.

Technical Note:
ESP LN... series protectors are designed only for cables running inside buildings and cannot provide protection against transient high levels for cables between buildings. They must not be used in the following scenarios: if used for inter-building cables, the protector is highly likely to overload and be instantly destroyed. When connecting equipment, in most cases, protection is achieved, but there is a small possibility of equipment damage.