Performance DS-N, DS-BNC, S-UHF	Usage Advantages
Low insertion loss at 2.5GHz	Wide range of applications
Built-in large flow discharge tube with gold	High lightning current flow capacity, better equipment protection
DS-BNC can be used in 50Ω and 75Ω feeder lines	Strong applicability
Provides different interfaces	Simple installation and design

Function and Application Areas

DS-N, DS-BNC, and S-UHF

Due to their high communication capacity, they are suitable for lightning protection in LPZ 0-2 areas. Internally, they use lightning protection components with very low additional capacitance and low insertion loss, making them applicable to high-frequency transmission feeder lines up to 2.5GHz.

LP7/16

Operates based on the filtering principle, functioning only within a very narrow band. It allows signals from a very narrow band to pass through while blocking other bands.

Fixed

This protector is directly installed on cables in LPZ 0-2 areas. When selecting the interface type of the protector, it must match the interface type of the protected equipment. If there is a mismatch, an interface converter can be used for compatibility.

Model	DS-N	DS-BNC	S-UHF
Transmission Power	400W
LPZ Area	0 → 2
Rated Discharge Current In (8/20)	5kA
Impulse Current Capacity Iimp (10/350) Transmission Frequency f Insertion Loss (2.5GHz) Ae	2×2.5kA 2.5GHz ≤0.8dB		2×2.5kA 1GHz
Response Time tA	＜100 ns
Weight	80g	50g	80g
Temperature Range υ	-35°C to +80°C

Model	LP 7/16-850 MF-C	LP 7/16-1800 MF-C
Operating Frequency	800 - 900 MHz	1700 - 1900 MHz
Current Flow Capacity Imax (8/20) Iimp (10/350)	100kA 50kA
Return Loss Insertion Loss Connection Torque Interface Strength Housing Protection Level	≤1.15 ≤0.1dB 25-35 N·m ≥500 IP67