China Laboratory High-Purity Water Equipment - China Supplier

Laboratory High-Purity Water Equipment

Price:￥電議：13561101688

Industry Category:	Environment Industry
Product Category:
Brand:	山東新瑞
Spec:	RS-II

Send Inquiry Contact Info

山東新瑞分析儀器有限公司

Product List About Us

Contact Info

Add:山東省棗莊市滕州市東沙河街道東沙河村首康康路10號(hào), Zip: 277500
Contact: 李書典
Tel:0632-5251855
Email:sdxinruiq@163.com

Other Products

The Xinrui Laboratory High-Purity Water System is a commonly used equipment in laboratories, meeting the technical requirements for purified water in experiments. The Xinrui Laboratory High-Purity Water System can almost completely remove conductive substances from water, as well as reduce non-dissociable colloidal substances, gases, and organic matter to very low levels. Its resistivity reaches a maximum of 10–18.3 MΩ·cm. Ultrapure water, which is difficult to achieve with ordinary pure water systems, typically requires industrial high-purity water equipment that employs four major steps: pretreatment, reverse osmosis technology, high-purity treatment, and post-treatment. This involves multi-stage filtration, high-performance ion exchange (polishing), ultrafiltration, UV lamps, TOC removal devices, and other treatment methods to achieve a resistivity of 18.25 MΩ·cm.

High-purity water primarily refers to water with a conductivity of less than 0.1 μS/cm at 25°C, a pH of 6.8–7.0, and the removal of other impurities and bacteria.

High-purity water is water with extremely high chemical purity, containing less than 0.1 mg/L of impurities. Currently, the purity of high-purity water produced can reach 99.999999%, with impurity levels below 0.01 mg/L. High-purity water mainly refers to water with a conductivity of less than 0.1 μS/cm at 25°C, a pH of 6.8–7.0, and the removal of other impurities and bacteria.

High-purity water refers to water from which conductive substances are almost entirely removed, and non-dissociable colloidal substances, gases, and organic matter are reduced to very low levels. The salt content of high-purity water is below 0.3 mg/L, with a conductivity of less than 0.2 μS/cm.

Features of the Xinrui Laboratory High-Purity Water System:

· Equipped with a silent pump, the system operates without vibration, noise, or electromagnetic radiation, ensuring no impact on the working environment.

· Utilizes reverse osmosis membranes with stable performance, high desalination rate, and long lifespan.

· Uses exchange resin for (ultra) purification columns, offering high exchange capacity and superior water quality output.

· Features an all-metal chassis with electrostatic spray painting, effectively preventing corrosion from moisture.

· Separated water and electrical circuits to avoid the impact of humid environments on electrical components.

Product Parameters of the Xinrui Laboratory High-Purity Water System:

Inlet Water Source	Municipal tap water, water temperature 5–40°C, water pressure 1–5 kg, TDS ≤ 300 ppm
Outlet Water Quality	① GB6682 Grade 3 laboratory water, conductivity 2–10 μS/cm, dual-stage RO (conductivity ≤ 5 μS/cm) ② GB6682 Grade 1 laboratory water, conductivity ≤ 0.1 μS/cm, resistivity 10–15 MΩ·cm Outlet water quality meets China National Laboratory Water Standards (GB6682-92)
Water Production Rate	5 L/H to 300 L/H (models above 30 L/H are floor-standing types)
Instantaneous Water Withdrawal	2 L/min	Water Storage Tank Configuration	Equipped with a 3.2-gallon pressurized storage tank

Product Features

1. Features power indicator, pump operation indicator, low-pressure indicator, and system flushing indicator functions.
2. Uses imported ion filtration membranes and high-pressure, silent pure water pumps for more reliable operation and broader water quality applicability.
3. Equipped with a system flushing function: automatically flushes for 18 seconds before starting water production each time.
4. Includes system protection: automatically shuts down when water pressure is too low or absent, and restarts when water supply resumes.
5. High output, low energy consumption, and power savings: output of 20 L/h with power consumption of only 25 W, 1/300 the power consumption of similar products.
6. Employs advanced water treatment processes, with a high-purity water output ratio of approximately 40% and low water consumption.
7. No electric heating tubes required, preventing scaling and eliminating the need for cleaning.
8. No heat loss; output water at room temperature requires no cooling and can be directly used in experiments.
9. Simple operation, easy maintenance, and low operating costs.
10. Features a two-stage RO pre-desalination system (optional for high-salinity water sources).
11. Supports water quality and output upgrades.

12. The RS-II series, in addition to the features and functions of the RS series high-purity water systems, includes water quality monitoring, enabling real-time monitoring of output water conductivity and temperature.