This device can be directly placed after the Profibus DP master station to convert a single-cable bus into a redundant bus; it can also be placed at the slave station to convert the redundant bus into a non-redundant cable, while offering features such as optocoupler isolation and interference reduction. The product is designed for industrial use, with an IP30 protection rating, a corrugated aluminum reinforced casing, 35mm DIN rail mounting, DC (9-36)V wide power input, and advantages including relay alarm output, dual power redundancy, and isolation protection.
Allen-Bradley 1305-BA01A-HAP is a product from the Bulletin 1305 AC drive series. The catalog number indicates the unique features of the drive. "1305" denotes the bulletin number. "B" indicates the input voltage, which is 380-460V AC. "A01" identifies the nominal rated current. "A" indicates that the device uses a NEMA Type 1 (IP30) enclosure. The fifth character is the language code; this type of device does not have a language code, so the default language is English. "HAP" identifies the type of Human Interface Module (HIM) used by the device. The HIM features a backlit LCD display and computer-like programming keys. It can also be detached from the 1305-BA01A-HAP drive.
The 1305-BA01A-HAP can withstand 1G of vibration. It does not provide special cooling equipment but uses natural convection as its cooling method. The ambient temperature range is 0 to 50°C with an enclosure and 0 to 40°C without an enclosure. The storage temperature range is -40 to 70°C, with a relative humidity of 0-95% (non-condensing). Additional AC dynamic braking torque can be achieved using the 1305 dynamic braking kit, with an output of 150% when using an external resistor and 130% without. The overall dimensions of the 1305-BA01A-HAP are 170 mm x 195 mm x 179 mm, and it weighs approximately 3.6 kg (8 lbs).
This design is for a three-phase AC induction motor with a power rating of 0.37kW (0.5HP) and an output current of 1.3A. It features an adjustable output voltage between 0V and the required input voltage, a programmable output frequency of 0-400Hz, and a 250mA ScanPort load (if all adapters are combined). The operating voltage range is 340 to 500V, 47 to 63Hz, with an input kVA of 0.9. The 1305-BA01A-HAP has a rated efficiency of 97.5%, a displacement of 0.8 (lagging), and a power consumption of 21W.