Fluorosilicon nano waterproof coating is a highly elastic colored polymer waterproof and anti-corrosion product, scientifically processed from raw materials combined with modifiers, additives, and color fillers. Its functional characteristics include sealing cracks and capillary channels in the substrate while absorbing stress without transmitting it, thereby reducing the impact of substrate deformation on the waterproof and anti-corrosion layer, endowing it with waterproof and anti-corrosion functionality.

When used in combination with roll materials, fluorosilicon nano waterproof coating exhibits excellent adhesion, allowing the roll material and coating to bond effectively. The complementary advantages of roll materials and coatings form a strong waterproof structural layer. This product is solvent-free and highly breathable, facilitating the evaporation of water vapor from inside buildings. Fluorosilicon nano waterproof coating: Suitable for waterproofing and anti-corrosion in subways, water channels, swimming pools, irregular concrete, and wooden structures. It can be used for both new waterproof and anti-corrosion layers and for repairing damaged ones. It is applicable for waterproofing and anti-corrosion in conventional areas as well as in deformation joints, offering advantages over other materials in regional waterproofing and anti-corrosion.

Due to its sealing capability, fluorosilicon nano waterproof coating can repair damaged parts of the waterproof and anti-corrosion layer. The surrounding material fills the damaged area, blocking water leakage and seepage between the waterproof and anti-corrosion layer and the concrete substrate. It is effective for sealing cracks, expansion joints, construction joints, and structural joints in buildings and underground concrete projects. Fluorosilicon nano waterproof coating construction sequence and method: The construction sequence should start with nodes and additional layers, followed by large-area brushing; joint sealing: Clean the joint groove and fill it with sealing material; joint surface reinforcement: After joint sealing (the product must be completely dry), an additional layer should be applied; overall coating: First, apply a primer to cover the entire surface, and after drying, apply multiple layers of the product.

When embedding grid cloth or other reinforcement materials in the fluorosilicon nano waterproof coating layer, it is advisable to apply the coating while laying the reinforcement; the reinforcement should be smoothed out to eliminate bubbles and ensure saturation with the coating material; the top layer of coating over the reinforcement should be applied in no fewer than two layers, with a thickness of not less than 1mm; when using two layers of reinforcement, the upper and lower layers should not be laid perpendicular to each other.