Color Appearance: Milky white nano aqueous emulsion

Solid Content: 50%±1

pH Value: 7~9

II Product Characteristics

Fluorosilicone nano waterproof coating topcoat is a non-toxic, odorless, non-flammable, and non-volatile nano emulsion. When diluted with water at a ratio of 1:15, the product penetrates into the capillary pores of architectural coatings, forming a colorless and transparent waterproof layer. This creates a breathable and hydrophobic invisible protective layer on the exterior coating, allowing internal moisture to evaporate while preventing external rainwater from seeping in. It exhibits a lotus leaf-like hydrophobic effect, providing waterproofing, dust resistance, and corrosion protection, thereby enhancing the coating's lifespan and performance.

III Product Application

Waterproof topcoat and stain-resistant waterproofing for architectural coatings.

IV Usage Method

1. The substrate must be dry, clean, and free from dust, oil stains, and other contaminants.

2. Dilute directly with water at a ratio of 1:15. Apply evenly by spraying or brushing twice using the "wet-on-wet" technique. Allow to dry for 24 hours before inspection. Avoid contact with water or oil within 24 hours, as it may affect the performance.

3. 1L of diluted solution can cover 5-10 square meters, depending on the porosity of the substrate.

V Storage and Transportation

1. Storage temperature: Above 0°C, store in a cool and ventilated place.

2. Product shelf life: Over 36 months.