Automatic Gas Adsorption Constant Determination Apparatus  WY-98A

Product Introduction

The fully automatic gas adsorption constant determination instrument (hereinafter referred to as the instrument) is primarily used to determine the adsorption constants (a, b values) of coal for gas during the measurement of coal mine gas content. This allows for the calculation of gas content per ton of coal seam using the actual gas pressure measured underground.

Usage Environment and Performance Characteristics

1. Usage Environment

(1) Operating temperature: 0～40℃;

(2) Relative humidity: ≤95%;

(3) Atmospheric pressure: 80 KPa～106 KPa;

(4) Mechanical environment: Locations without significant vibration and impact, and no strong magnetic field interference around the laboratory.

2. Performance Characteristics

The device is designed with an integrated concept, incorporating the main systems of vacuum degassing and high-pressure adsorption internally. This replaces the traditional decentralized operation mode, improving testing efficiency and accuracy;

The device features a high level of intelligent operation, with automated and intelligent experimental processes programmed into the system control software. It is easy to operate, provides scientifically accurate data, and reduces human error;

The entire determination process is automatically controlled without manual intervention; the constant temperature water bath automatically drains water and includes a water level indication function;

Data charts are collected under computer control, and experimental reports and charts can be customized and printed;

The high-pressure adsorption process is controlled by solenoid valves, automatically adjusting different pressure points and capturing real-time data;

The data analysis software features a user-friendly interface, is simple to operate, automatically outputs data results, and automatically fits the isothermal adsorption curve.

II. Technical Parameters

Sensor measurement range: 0～10 MPa;

Accuracy: 0.001 MPa

Measurement parameters: a, b values;

Weighing system: Measurement range 0-200 g

Accuracy: 0.1 mg

Experiment time: 48 h;

Degassing time: 4 h;

Air tightness: ≤10 Pa;

Power supply: 220 V;

Methane concentration: 99.99%