1200m High Head Bottom Suction Submersible Pump

Example: 250QJX80-300/10

250 indicates the applicable well diameter is not less than 250mm. Q stands for submersible (initial letters of Chinese Pinyin); J stands for well use (initial letters of Chinese Pinyin); X indicates the pump sucks water from the bottom (initial letters of Chinese Pinyin): 80 means the flow rate is 80m3/h; 300 indicates the head is 300 meters; /10 means 10-stage impellers in series.
Zhijiang Brand 1200m High Head Bottom Suction Submersible Pump is a new type of water lifting machinery carefully developed by Tianjin Zhijiang Pump Industry, widely used for water extraction from rivers and lakes; mine water supply and drainage; construction or renovation of urban tap water systems and various regional secondary water supply systems. The QJX bottom suction pump adopts an integrated design, with a robust overall structure, simple installation and maintenance, and stable operation; high mechanical efficiency and low operating costs. The motor uses a dynamic water jacket for cooling, with excellent heat dissipation conditions, effectively extending the motor's service life. There is no need to build a pump room or fixed lifting equipment, significantly reducing the investment in civil engineering and supporting equipment for the water supply system. The equipment operates submerged, with no noise, water leakage, or oil leakage, causing no environmental pollution, and is easy to conceal for harmony with the surrounding environment. Flow rate: 5-2000 m3/h Head: 10-1800 m.

Tianjin Zhijiang Pump Industry professionally provides various submersible pumps for special working conditions, with stable performance, especially strong technical capability in bottom suction submersible pumps, timely supply, energy-saving, and environmental protection. Zhijiang brand bottom suction submersible pumps have been used for years with good results and stable operation.

Zhijiang Brand 1200m High Head Bottom Suction Submersible Pump Equipment Advantages

--Careful assembly in the factory ensures quick and reliable on-site installation

--Multi-stage impellers are used, with extremely low noise

--Built-in check valve to prevent water hammer impact.

--High single-stage head, which can reduce the overall unit height and increase operational stability. The pump shaft diameter is φ38mm, enhancing the torsional resistance of the pump shaft. The bushings are made of natural rubber material for better wear resistance and are equipped with hard bushings made of imported materials. (Added metal outer protective sleeve, a specialty product)