ZX-903 Thermal Oil Heater Online Cleaning Agent

ZX-903 Thermal Oil Heater Online Cleaning Agent (High-Temperature Thermal Oil Cleaning Agent) is specifically designed for online chemical cleaning of thermal oil heaters and their pipeline systems during uninterrupted operation. It can be directly added and used in thermal oil systems operating below 300°C without shutdown, achieving the goal of cleaning thermal oil heaters without halting operations. This product is a new type of chemical cleaning agent independently developed by our company, incorporating advanced foreign technology. It is primarily used for descaling, anti-scaling, and scale removal during the normal production and operation of thermal oil heater heating systems. It has been widely used in the maintenance of thermal oil heater heating systems in major petrochemical companies, shipyards, enterprises, and institutions.

Thermal Oil Heater Online Cleaning Agent dissolves various types of difficult-to-remove oil residues, carbon deposits, and other stubborn contaminants within the system through special chemical reactions. The cleaning process is gentle, safe for operators, and does not affect the normal operation of the system.

ZX-903 Thermal Oil Heater Online Cleaning Agent Characteristics:

Non-corrosive: After adding to the system and starting the cleaning process, it does not alter the properties of the system's thermal oil. The cleaning is completed under non-corrosive conditions.

Cleaning procedure: Capable of removing various types of difficult-to-dissolve oil residues and carbon deposits.

Safe cleaning: The cleaning process dissolves oil residues and carbon deposits within the system, integrating the cleaning solution with the oil. There is no risk of sludge detachment throughout the entire cleaning process.

Easy to use: Simply add the thermal oil heater online cleaning agent to the operating system as required.

Safe and harmless: Harmless to humans and the natural environment, it operates directly within normally functioning systems.

Low cost: The cost of the agent is significantly lower than traditional shutdown cleaning methods.

ZX-903 Thermal Oil Heater Online Cleaning Agent Application Scope:

Various boilers and their pipeline systems that use thermal oil as a medium.

ZX-903 Thermal Oil Heater Online Cleaning Agent Usage Method: Add according to 3%-10% of the thermal oil heater system's oil capacity based on the system's operating conditions. It can be directly added and used in thermal oil systems operating below 350°C without shutdown. The system will complete the cleaning with the agent in 7–10 days.

Usage Method

1. Pre-discharge treatment

Before discharging degraded thermal oil from the thermal oil heating system, add 3%–10% by volume of ZX-903 Thermal Oil Cleaning Agent to the system, then continue operation for 7–10 days. During this period, closely monitor the system's built-in filter device to prevent residue blockage. Then drain the system and refill with new oil.

(1) Without shutting down, reduce the oil heater temperature to between 100°C and 300°C (if the boiler temperature is already within this range, it can be used directly). Then, add ZX-903 Thermal Oil Online Cleaning Agent to the oil heater system via the expansion tank. Add it in batches slowly, with each addition typically around 0.5% to 1% of the system's capacity. Add the agent every hour. After completing the addition, release some thermal oil from the low-level drain port to allow the agent to slowly enter the circulation system through the expansion tank.

(2) Maintain normal operation of the oil heater. After the cleaning agent enters the system, it will fully mix with the thermal oil. The polarized molecules in the online cleaning agent will slowly dissolve oil coke on the pipe walls through penetration.

(3) Within two days of adding the thermal oil online cleaning agent, monitor pressure changes closely. If the pressure decreases significantly, promptly open the bypass and clean the filter screen to prevent dissolved oil coke and large particles of oil residue from clogging the filter.

(4) Circulate and clean for 5-7 days. After cleaning is complete, directly replace the thermal oil.

ZX-903 Thermal Oil Heater Online Cleaning Agent Q&A:

1. How is the dosing amount calculated?

Dosing amount = System thermal oil volume × 3%. For example: For a 5t thermal oil boiler, dosing amount = 5 tons × 3% = 0.15 tons.

2. How to add the agent to the thermal oil heater?

  Add theZX-903 Thermal Oil Heater Online Cleaning Agent to the operating system directly through the expansion tank in batches according to the dosing amount (to ensure the agent enters the thermal oil heater system evenly). It can be directly added without shutdown in thermal oil systems operating below 300°C.