PCB Depaneling Fixture Stress-Strain Tester DL-2000-56C

For more models and parameters, contact 13662640131 (same number for WeChat)

Shenzhen Pincong Technology Development Co., Ltd. was established in 2011 as a comprehensive enterprise integrating R&D, production, and sales. The company specializes in the development and application of stress-strain testing technology, providing PCB strain testing solutions for the 3C electronics, automotive electronics, and semiconductor industries. The DL-1000 series are portable stress testers mainly used for circuit board ICT stress testing, FCT stress testing, assembly stress testing, depaneling stress testing, drop stress testing, etc. They are also commonly used for air conditioning pipeline stress testing, glass stress testing, and stress testing of structural components. The instruments are compact, portable, and feature user-friendly software, making them suitable for rapid measurement in factories and automatic report generation with one click according to IPC/JEDEC-9704 standards. They provide comprehensive stress testing analysis for production testing processes. In addition to meeting basic functional requirements such as stress value analysis, maximum principal strain, diagonal strain, and stress rate analysis, the system can be expanded in functionality and channel count (8, 16, 24, 32, 40, 48, 56, or 64 channels can be selected as needed) to accommodate future customer development needs.

AKEMOND Stress Tester 120 Ohm Equipment:

DL-1000-8C 8-channel stress tester expandable to 32 channels

DL-1000-16C 16-channel stress tester expandable to 32 channels

DL-1000-24C 24-channel stress tester expandable to 32 channels

DL-1000-32C 32-channel stress tester expandable to 32 channels

DL-1000-40C 40-channel stress tester expandable to 64 channels

DL-1000-48C 48-channel stress tester expandable to 64 channels

DL-1000-56C 56-channel stress tester expandable to 64 channels

DL-1000-64C 64-channel stress tester

Stress Tester Features:

The dynamic strain testing analysis system (dynamic strain gauge) is suitable for measuring high-speed dynamic stress analysis of components. This dynamic strain testing system uses a DC voltage amplifier, built-in anti-aliasing hardware filters, and 24-bit independent AD converters. High precision and high sampling rates ensure the device can capture minute, instantaneous changes in the measured object, restoring the true state of the object.

Strain Tester Technical Parameters:

◆ Channels per module: 8/4 analog input channels

◆ Sampling rate: 10 kHz per channel

◆ Sampling mode: Multi-channel synchronous sampling

◆ ADC resolution: 24-bit

◆ Supported strain sensor resistance: TSK-32A series supports 120Ω, TSK-32B series supports 350Ω

◆ Supported Wheatstone bridge type: 1/4 bridge

◆ Conversion accuracy: 3.5062 nV/V/LSB

◆ Gain error accuracy: 0.02% (calibrated, under standard measurement conditions 25°C, ±5°C)

◆ Full-scale range: ±29.4 mV/V (+62500 μE/-55500 μE)

◆ Overvoltage protection between terminals: ±30V

◆ Stability: Gain drift 6 ppm/°C

◆ Chassis interface type: USB 2.0 high-speed input

◆ Power supply: 11 to 30 VDC, 220 VAC

◆ Operating temperature: -40°C to 70°C, operating humidity: 10% to 90% RH, non-condensing

◆ Storage temperature: -40°C to 85°C, storage humidity: 5% to 90% RH, non-condensing

◆ Protection rating: IP 40

Working Principle of Strain Gauges:

The signals from strain gauges are balanced through a Wheatstone bridge module and converted into corresponding voltage signals. After passing through the tester's internal analog/digital circuits, the voltage signals are converted into digital signals, which are then captured and analyzed by the software.

TSK Strain Gauge Model Selection (General-purpose strain gauges for electronic factory testing)

Uniaxial Strain Gauges:

Base size 4mm x 2mm rectangle, wire length can be selected according to actual needs:

TSK-1B-120-1A-11L1M2S (1 meter)

TSK-1B-120-1A-11L2M2S (2 meters)

Strain gauges with base size 2.2mm x 2.5mm:

TSK-1R-120-1A-11L1M2S

TSK-1R-120-1A-11L1M2S

Uniaxial strain gauges with base size 1.3mm x 1.5mm:

TSK-05R-120-1A-11L1M2S

TSK-05R-120-1A-11L2M2S

Biaxial Strain Gauges:

Biaxial strain gauges with base size 5mm x 5mm:

TSK-1A-120-2A-11L30W07MS

Triaxial Strain Gauges:

Triaxial with base size 5mm x 5mm:

TSK-1A-120-3A-11L1M2S

TSK-1A-120-3A-11L30W07MS

Triaxial with base size 4mm x 4mm:

TSK-1E-120-3A-11L1M2S

TSK-1E-120-3A-11L50W05MS

TSK-1E-120-3A-11L50W09MS

Triaxial with base size 2.5x2.7mm x 4mm:

TSK-1D-120-3A-11L1M2S

TSK-1D-120-3A-11L50W09MS

Triaxial with base size 1.5x1.5mm x 4mm:

TSK-05R-120-3A-11L50W07MS

TSKB-05L-120-3A-11L50W07MS

For more models and parameters, contact 13662640131 (same number for WeChat)