Composite Material FS (Eagle Brand) SPOT 50 - Magic Finishing Agent Helps you solve weld lines and flow marks in plastic products, reducing the occurrence of defective items. Features: 1. Light weld lines and flow marks show immediate improvement with a thin spray coating; 2. If weld lines remain visible after coating, spraying this product before recoating can still achieve ideal results; 3. If the product surface is too glossy, spraying this agent will turn it matte. Suitable Plastics: ABS, AS, PC, Acryl, rigid vinyl chloride, etc. Unsuitable Plastics: PP, PE, PS, soft vinyl chloride, thermosetting plastics, etc. Usage Method: 1. Shake well before use; 2. Ensure the product surface is clean, dry, oil-free, and dust-free; 3. Maintain a distance of approximately 30cm from the product surface. Precautions: 1. This product is only suitable for plastic products with textured (spark) or grain patterns; not suitable for smooth, mirror, transparent, or very thin soft plastic products. 2. Spray an appropriate amount for immediate effect; excessive spraying may cause issues such as cracking, wrinkling, swelling, or whitening. 3. Dries normally at room temperature without issues; forced drying at low temperature (80°C) yields better results, with full hardening in 20 minutes. Capacity: 300ml/bottle Packaging: 48 bottles per case Color: Transparent and black options available