Composite Material (Eagle Brand) SPOT PP - Magical Powerful Finishing Agent Helps you solve weld lines and air marks on plastic products, reducing the occurrence of defective items. Features: 1. For mild weld lines and air marks, spray a thin film for immediate effect; 2. If weld lines are still visible after coating, spraying this product before recoating can still achieve ideal results; 3. If the product surface is too glossy, spraying this product will turn it matte. Suitable Plastics: PP, ABC, AS, PC, Acryl, rigid/soft vinyl chloride, Nylon, Urethane, Phenol epoxy, etc.; All plastic products not suitable for Spot 50 can use this product for surface treatment; special attention is needed for soft vinyl chloride and Nylon. Usage Method: 1. Shake well before use; 2. The product surface must be clean, dry, oil-free, and dust-free; 3. Maintain a distance of about 30cm from the product surface. Precautions: 1. This product is only suitable for plastic products with etched patterns (spark patterns) and leather textures, not suitable for smooth surfaces, mirror finishes, transparent, or very thin soft plastic products. 2. Spray an appropriate amount for immediate effect; excessive spraying may cause issues such as cracks, wrinkles, swelling, or whitening. 3. Drying at room temperature is fine, but forced drying at low temperature (80°C) yields better results, with full hardening in 20 minutes. Capacity: 420ml/bottle Packaging: 48 bottles per case Color: Transparent and black