Changsha Sonic Logging Pipe Manufacturer, Changsha Sonic Logging Pipe Specifications, Changsha Sonic Logging Pipe Stock Specifications, The ultrasonic testing pipe is economical and designed with conventional steel pipes, saving more than 2/3 of steel and significantly reducing material costs; as the most user-friendly sonic logging pipe product currently available in China, it saves substantial labor costs at every stage and significantly improves work efficiency; among thin-walled sonic logging pipes with various connection methods, this product can be cut to any required length on-site, eliminating waste from short pipes and material remnants, resulting in a significant reduction in overall actual costs.

Mainly used in highway bridges, municipal engineering, and railway engineering for various pile foundation ultrasonic testing, grouting, concrete cooling, and other embedded pipeline systems. In cases of lower blockage in sonic logging pipes, typically referring to blockages below 40 meters in depth, manual extraction of steel strands is too labor-intensive. Instead, the steel strands can be anchored to an excavator's bucket or a crane's small hook, lifted mid-air to impact the blocked section, and then flushed out with a water pump to remove the fragmented material, repeating the process as needed.

For blockages below 20 meters in depth, a rebar impact method can also be used. A 100m long, 4mm diameter steel wire rope is used to suspend a 3.5m long, 22mm diameter threaded rebar for up-and-down impact, combined with a water pump to flush out the impact debris from the sonic logging pipe. Since the rebar is relatively thinner and has bending elasticity compared to an 800px solid steel column, it is less prone to jamming despite its length. After疏通 is completed using a water pump pipe with刻度標(biāo)識 at every meter, a 750px long, 80px diameter steel cylinder (shaped like a probe, slightly larger) is used to measure the depth of the疏通ed sonic logging pipe. This probe, being longer and thicker than the sonic probe, ensures that the ultrasonic pile testing probe does not get stuck in the pipe during inspection.

Spiral (flange type, sleeve type) sonic logging pipe specifications and models:
50*1.5 50*1.6 50*1.7 50*1.8 50*1.9 50*2.0 50*2.1 50*2.2 50*2.3 50*2.4 50*2.5 50*2.6 50*2.7 50*2.8 50*2.9 50*3.0 500*3.2 50*3.3 50*3.4 50*3.5
54*1.5 54*1.6 54*1.7 54*1.8 54*1.9 54*2.0 54*2.1 54*2.2 54*2.3 54*2.4 54*2.5 54*2.6 54*2.7 54*2.8 54*2.9 54*3.0 544*3.2 54*3.3 54*3.4 54*3.5
57*1.5 57*1.6 57*1.7 57*1.8 57*1.9 57*2.0 57*2.1 57*2.2 57*2.3 57*2.4 57*2.5 57*2.6 57*2.7 57*2.8 57*2.9 57*3.0 577*3.2 57*3.3 57*3.4 57*3.5