I. Product Introduction

Mobil Exxsol D130 is a high flash point dearomatized solvent oil, belonging to the category of paraffinic solvent oils. It has a distillation range of 279~313°C, a flash point of 140°C, a density of 0.824 g/cm3, a viscosity of 6.12 mm2/s (25°C), an aromatic content of 0.6%, a relative evaporation rate of <0.01 (n-BuAc=1), a KB value of 24, a bromine number of <10 mg/100g, a surface tension of 28 mN/m (25°C), and a refractive index of 1.454 (20°C). The product is packaged in iron drums, with a specification of 167 kg/drum.

The advantages of Exxsol D130 include: a narrow distillation range, surface compatibility with most products, and it is not classified as hazardous during transportation.

ExxonMobil Exxsol D130 can be used as a metalworking fluid (foundry fluid, stamping oil, cutting oil, EDM fluid, aluminum rolling oil), a solvent for consumer products (insecticide aerosol solvent, solvent for liquid sprayers), and in the rubber and plastic industries as a lubricant, release agent, plasticizer, and ink solvent (high boiling point).

II. Environmental Solvent Oil Exxsol D130 Quality Index Report

III. Precautions

1. ExxonMobil environmental solvent oil drums have ExxonMobil anti-counterfeiting marks on the lid and anti-counterfeiting barcodes on the drum surface. Identify the brand to avoid counterfeits.

2. Environmental solvent oil should not be stored upright outdoors to prevent contamination by moisture and impurities.

3. For indoor storage, place the drum upright with the top facing up for easy extraction.

4. Tighten the seal cap to keep the oil drum sealed.

5. Do not place flammable materials nearby. Open flames are strictly prohibited, and do not bring ignition sources near the oil drum.

6. Store flammable specialty oils or chemical solvents separately and place flammable material signs.